The DiscMaster 3DBB is a disc(cup brush) and roller brush sanding machine for large production lines .It is ideal for:

• Removing fibres on wood, MDF and veneered work pieces.
• Sanding profiles, radii, crossovers and surfaces.
• Preparing MDF for 3D foil wrapping.
• Preparing the work piece for further surface treatment.
• Denibbing paint and lacquer.

The DiscMaster works with 16 discs which no longer oscillate but rotate eccentrically. The advantages are firstly, a significantly longer sanding time due to three rows of discs. This increased sanding intensity is of the utmost importance in wood sanding. Secondly, the eccentric rotation of the discs ensures that the sanding strips reach even the smallest of mouldings. An additional blurring effect is also achieved on the surface. Last but not least you get a uniform breaking of the side edges, independent of the feed speed.

The two large, counter-rotating rollers which follow ensure that you get that even finish in the direction of the feed.

The DiscMaster Compact is the genuine alternative for smaller and medium-sized operations and offers first-class sanding results at an affordable price.

• Removing fibres and smoothing wood, MDF and veneered work pieces.
• Sanding out milling marks.
• Sanding profiles, radii, crossovers and surfaces.
• Preparing MDF for 3D foil wrapping.
• Preparing the work piece for further surface treatment.
• Denibbing paint and lacquer.

The DiscMaster Compact works with 7 discs which no longer oscillate but rotate eccentrically. The advantages are firstly, a significantly longer sanding time due to three rows of discs. This increased sanding intensity is of the utmost importance in wood sanding. Secondly, the eccentric rotation of the discs ensures that the sanding strips reach even the smallest of mouldings. An additional blurring effect is also achieved on the surface. Last but not least you get a uniform breaking of the side edges, independent of the feed speed.

The two counter-rotating rollers which follow ensure that you get that even finish in the direction of the feed.

Due to the two rows of discs side by side and the five hold-down rollers, there is no need for a vacuum belt, thus keeping your investment and operating costs at a minimum.

The DiscMaster 3DBBP is ideal for:

• Removing fibres and smoothing wood, MDF and veneered work pieces.
• Sanding out milling marks.
• Sanding profiles, radii, crossovers and surfaces.
• Preparing MDF for 3D foil wrapping.
• Preparing the work piece for further surface treatment.
• Denibbing paint and lacquer.

The DiscMaster works with 16 discs which no longer oscillate but rotate eccentrically. The advantages are firstly, a significantly longer sanding time due to three rows of discs. This increased sanding intensity is of the utmost importance in wood sanding. Secondly, the eccentric rotation of the discs ensures that the sanding strips reach even the smallest of mouldings. An additional blurring effect is also achieved on the surface. Last but not least you get a uniform breaking of the side edges, independent of the feed speed.

The two large, counter-rotating rollers which follow ensure that you get that even finish in the direction of the feed. Finally the planetary disk station at the end disguises all marks to give a uniform finish.